Harmonic ProView 7000 User Manual page 136

Chapter 4 Element Management System (EMS)
4.6.1.5 NIT Replacement
You can replace the NIT in an output multiplex with a PID from an input multiplex. The default
PID for the NIT is 16.
Replacing a NIT
To replace the NIT with a PID from an input multiplex:
1. Drag the program ES in the Multiplex Input box to the NIT under Tables of the multiplex in
the Multiplex & Decoding Output box.
2. Confirm the confirmation dialog.
Cancelling a NIT Replacement
To cancel a NIT replacement:
1. Double-click
The NIT - Properties dialog displays.
© 2011 Harmonic Inc.
under Tables of the multiplex in the Multiplex & Decoding Output box.
NIT
136
Cross Connections
ProView 7000 v.2.4, Rev. A