Chapter 3 Configuration and Monitoring
14. Navigate
15. Select the CAM slot.
3.3.2
Monitoring the ProView 7000 using the Front Panel
How to monitor the correct operation of the ProView 7000 device.
Status OK
When there are no errors the message
ProView 7000 front panel LEDs are lit green.
The following program information displays on the LCD:
The DVB program selected when SDT is received with the following, name, ID, type and
■
scrambling status.
The MPEG service selected with the ID and scrambling status.
■
Video picture displays on the monitor.
Audio channels left and right give correct sound, synchronized to the picture that is displayed.
Alarms
If a failure is detected in the ProView 7000 operation, the
the
message.
Alarm
The alarm message displays the total number of alarms and the number of alarms at the
highest severity level raised (not the highest severity available).
In addition to the alarm message, the Warning LED on the front panel changes color
according to alarm severity, red, orange or yellow. Red is the highest severity.
© 2011 Harmonic Inc.
Root > Decoding > Configuration> Descrambling > CAM Selection
Status OK
Active Alarms (1)
Major (1)
How to Configure and Monitor the ProView 7000
displays on the LCD and the two
STATUS OK
BBC
ID: 4301
Status OK
BBC
ID: 4301
31
.
TV
CAS
message changes to
TV
CAS
ProView 7000 v.2.4, Rev. A