Harmonic ProView 7000 User Manual page 162

Chapter 5 Front Panel Interface
The screen provides access for setting-up the following parameters:
Video Format – selects the video format.
■
Options: 720p@50, 720p@59, 720p@60, 1080i@50, 1080i@59, 1080i@60.
Aspect ratio Conversion – selects the aspect ratio conversion.
■
Options: Center-cut, Pillarbox (Side-bars), Full Screen.
Composite Monitor Output Sub-menu:
The Composite Monitor Sub-menu controls the parameters of the analog (CV) video stream
provided for monitoring the HD video stream on the output program.
To access the Monitor Sub-menu screen:
❖ Navigate
The screen provides access for setting-up the following parameters:
Video Format – selects the video format.
■
Options:
NTSC
❑
PAL-B/G, -I, -D, -M, -N
❑
French SECAM
❑
Aspect Ratio Conversion – selects the aspect ratio conversion. These options change when
■
you change the aspect ratio.
Options:
Center-cut
❑
Letterbox
❑
Full Screen
❑
Aspect ratio – selects the aspect ratio.
■
Options:
4:3
❑
16:9
❑
5.2.2.5 PCR Configuration Menu
The PCR Configuration menu enables you to set up the clock synchronization parameters for
the modulated program.
To access the PCR Configuration screen:
❖ Navigate to
Clock Source
A/V Sync
A/V Offset Compensation
Genlock Type
© 2011 Harmonic Inc.
Root > Decoding > Configuration > Video > Composite Monitor Output
Root > Decoding > Configuration > PCR
PCR
.
162
Front Panel Root Menu
.
Original PCR
Frame
02 [ms]
Digital
ProView 7000 v.2.4, Rev. A