Chapter 3 Configuration and Monitoring
3.2.3
Launching the ProView 7000 EMS
To launch the ProView 7000 EMS:
1. Double-click the Harmonic ProView 7000 EMS launch icon
The EMS GUI displays.
2. Click
3. The EMS displays the ProView 7000 Device – Add dialog.
4. Enter a name for the new ProView 7000 device.
5. Enter the IP Address of the new ProView 7000 device.
6. For automatic connection when launching the EMS, mark the Connect Device
checkbox.
7. Click
Add
8. Select the device in the Devices box of the EMS window.
9. Click
Device Explorer
10. If the device fails to connect:
a
Right-click the device icon in the Device box and select
menu.
b
Click
c
Right-click the device icon in the Device box and select
menu.
If the ping fails and the device fails to connect, check your network connections and
settings.
d
Click
See Figure 3–1 for EMS stream management callouts.
© 2011 Harmonic Inc.
on the EMS toolbar.
Add Device
.
in the EMS toolbar to display input and output stream trees.
in the
dialog box.
Ping
Ping
in the EMS toolbar to display input and output stream trees.
Device Explorer
26
The ProView 7000 EMS
to launch EMS.
in the device context
Ping
in the device context
Connect
ProView 7000 v.2.4, Rev. A