Harmonic ProView 7000 User Manual page 133

Chapter 4 Element Management System (EMS)
4.6.1.2 Program Cross Connection
To create a new program cross connection:
1. Drag a program from a multiplex in the Multiplex Input box and drop it onto a multiplex in
the Multiplex & Decoding Output box.
The Dynamic Program Connection Configuration dialog displays enabling you to change
the program details.
2. Set the required parameters:
Enabled – Defines the operational status of the program.
❑
Input – Displays the name of the input multiplex which receives the stream and the
❑
number of the multiplex program.
Output – Displays the name of the output multiplex port where the stream is routed
❑
and the number of the multiplex program routed to the port.
Descrambling – Enables descrambling the program and selects the CAM used for the
❑
descrambling. If no CAM is associated it is indicated here.
© 2011 Harmonic Inc. 133
Cross Connections
ProView 7000 v.2.4, Rev. A