Multiplex & Decoding Output Properties; Figure 4-32: Multiplex Out 1 Port - Properties Dialog; The Multiplex & Decoding Output Box Of The Device Explorer Tab Presents A Hierarchical Tree - Harmonic ProView 7000 User Manual

Chapter 4 Element Management System (EMS)
4.5.4 Multiplex & Decoding Output Properties
The Multiplex & Decoding Output box of the Device Explorer tab presents a hierarchical tree-
structure of the multiplex and decoded outputs of the ProView 7000. The Multiplex &
Decoding Output tree features two main branches:
The Output Multiplexing main branch, detailed in
■
divided into Output Programs branch (detailed in
Properties
streams in the program), Output Tables branch (detailed in
Properties) and Unreferenced Output PIDs branch (detailed in
PID Properties), related to the multiplex output. The multiplexing output main branch also
includes pass through streams, routed to the output (detailed in
Port Route Properties
The Output Decoding main branch, detailed in
■
Each branch can be drilled down to display the structure of the branch for monitoring and
configuring the features of each element.
4.5.4.1 Multiplex Output Properties
The Multiplex Output Port Properties dialog displays the current status of the multiplex
output stream features and enables setting up the editable ones.
To display the Multiplex Output Stream Properties dialog:
1. Select the Multiplex Output icon from the Multiplex & Decoding Output box on the
Device Explorer tab.
2. Click
Properties
The information provided by the Multiplex Output Properties dialog includes the following:
Enabled – Enables (Yes/No) the multiplex output operation.
■
Transport Stream ID – Displays the transport-stream's ID number.
■
Table Extraction – Select PSI/SI for DVB or PSI for MPEG. The default is PSI/SI.
■
Configured Bitrate – Displays the calculated bitrate of the output stream (in bps).
■
Actual Bitrate – Displays the actual bitrate of the output stream (in bps), not including
■
NULL stuffing.
© 2011 Harmonic Inc.
and 4.5.4.4 Output Multiplex Elementary Stream Properties
dialog).
on the EMS toolbar.
Figure 4–32: Multiplex Out 1 Port - Properties dialog
4.5.4.1 Multiplex Output
4.5.4.3 Output Multiplex Program
4.5.4.5 Output Tables
4.5.4.7 Decoding Channel
110
Element Properties Configuration
Properties, is
for the elementry
4.5.4.6 Output Unreferenced
4.5.4.2 Transport Stream
Properties.
ProView 7000 v.2.4, Rev. A