Cam Slot Management - Harmonic ProView 7000 User Manual

Chapter 4 Element Management System (EMS)
The Decoding Channel properties dialog displays, enabling the user to review and
configure the decoding properties (for detailed description, refer to
Channel
NOTE: The EMS enables building your own decoded output stream, by selecting specific elementary
stream from a program. Drag and drop the ES icon from the input program branch into the Output
decoding icon. The ES Decoding Properties dialog will open, allowing setting the relevant parameters (for
detailed description, refer to
CAUTION: Do not use ES from different programs.
2. Click
OK
NOTE: Descrambling Set-Up TIP:
When setting a program or an ES for decoding, the decoder properties menu enables the user to
descramble the program and to select the CAM slot for the descrambling process.
Refer to 4.5.4.7 Decoding Channel Properties
provided by the Decoding Channel Properties dialog.
4.6.3

CAM Slot Management

Use the EMS CAM management to allocate available CAM slots to selected multiplex input or
to a multiplex program.
CAM Slot Management
To allocate a CAM slot to a multiplex input:
1. In the Device tree, right-click the CAM slot icon and select
The CAM Slot Properties dialog displays.
2. Select the input multiplex port.
© 2011 Harmonic Inc.
Properties).
4.5.4.7 Decoding Channel
to confirm the decoding set-up.
Properties).
in this manual for a detailed description of the options
Properties
139
Cross Connections
4.5.4.7 Decoding
.
ProView 7000 v.2.4, Rev. A