Multiplex & Decoding Output Box - Harmonic ProView 7000 User Manual

Chapter 4 Element Management System (EMS)
4.4.2.3 Input Unreferenced PIDs Management
Click the Unreferenced PIDs branch in the Multiplex Input box to display all the PIDs related to
the multiplex input that are not referred to a specific program or table.
NOTE: The properties of the input unreferenced PIDs in the multiplexed input stream is detailed in
4.5.3.6 Input Unreferenced PID
4.4.3 Multiplex & Decoding Output Box
The Multiplex & Decoding Output box of the Device Explorer tab presents a hierarchical tree-
structure of the decoded and multiplex outputs of the ProView 7000, comprises two branch
types; multiplexing branches (
The multiplexing branch provides monitoring and configuring options for the features of
stream and each element in the branch; Programs, Tables and unreferenced PIDs related to
the multiplex output. For details, refer to
(programs),
Unreferenced PIDs Management
The decoding branch provides monitoring and configuring options for the features of each
element in the branch. For details, see
Transport streams can be routed as they are to the output ports (pass-through). For details,
see 4.4.3.6 Pass Through TS
The ProView 7000 supports up to four multiplex outputs.
TIP: Creation of multiplex and decoded output streams is detailed in
1. A license is required for more than one multiplex output.
© 2011 Harmonic Inc.
Properties.
) and the decoding branch (
4.4.3.3 Multiplex Output Tables Management
(PIDs).
Routing.
4.4.3.2 Multiplex Output Programs Management
(tables),
4.6 Cross Connections.
1
4.6 Cross
72
Device Explorer
).
4.4.3.4 Multiplex Output
Connections.
ProView 7000 v.2.4, Rev. A