Device Explorer; Figure 4-10: Device Explorer Tab - Harmonic ProView 7000 User Manual

Chapter 4 Element Management System (EMS)
4.3.3.12 Removing a Device
Removing, or Deleting a ProView 7000 device from the EMS management, disconnects all
communication between the device and EMS and the device is no longer available via EMS.
To regain access to the device via EMS, add the device to EMS, see
ProView 7000 Device
Removing a device from the EMS management can be performed on any ProView 7000
device (i.e., listed in the Device box), regardless of its status; connected (full color icon),
disconnected (gray icon) or even a not responding device (red marked icon).
To remove a device:
1. Select the device which needs to be removed.
2. Click
A confirmation dialog displays.
3. Select
OK
The device is removed from the device list.
NOTE: Removing a device can also be done by selecting Action > Remove in the EMS Menu bar or
selecting the Delete key.
4.4

Device Explorer

The Device Explorer tab displays a hierarchy-map of the input and output ports, transport-
streams, programs, elementary streams, PIDs, Tables, CAMs and decoders that are currently
connected and cross-connected by the ProView 7000 selected for management on the EMS.
To display the Device Explorer tab:
❖ Select
File > Open Device Explorer
Physical Input
Device Explorer tab
© 2011 Harmonic Inc.
for details.
on the EMS toolbar.
Remove
.
Multiplex Input
Figure 4–10: Device Explorer tab
and select a device from the displayed device list.
Multiplex & Decoding Output
64
Device Explorer
4.3.3.1 Adding a New
Physical Output
ProView 7000 v.2.4, Rev. A