Chapter 3 Configuration and Monitoring
6. To associate a different port or additional ports to a Multiplex In:
a
Drag a Port from the Physical Input box to a Multiplex In in the Multiplex Input box.
A confirmation dialog displays.
b
Click
7. To cross-connect an input transport stream, a program, an EMM in a conditional access
table (CAT) or even an unreferenced PID:
a
Drag the item from the Multiplex Input box and drop it into the Multiplex & Decoding
Output box.
The Cross-Connect configuration dialog displays for you to configure the parameters
of the routed element.
b
Configure the desired parameters and click
© 2011 Harmonic Inc.
to create the association.
Yes
How to Configure and Monitor the ProView 7000
to create the cross-connect.
Create
36
ProView 7000 v.2.4, Rev. A