Chapter 4 Element Management System (EMS)
6. Click
OK
4.7
Refreshing the EMS Screen
The EMS supports a user-driven screen refresh function. This function can refresh the
following:
Element – Updates a branch or specific element in the stream, either at the multiplexed
■
input or the multiplexed output.
Device – Updates the currently managed ProView 7000 device.
■
To refresh an element or device:
1. Select an element or device.
2. Select
File > Refresh > [device|element]
—or—
click
Refresh
You can also perform a refresh by right-clicking the element icon and selecting the Refresh
item in the displayed element drop-down menu.
© 2011 Harmonic Inc.
to confirm the decoding set-up.
on the EMS Toolbar.
143
Refreshing the EMS Screen
ProView 7000 v.2.4, Rev. A