Table of Contents
Advertisement
TP 1B Format — Select
•
press the
HDMI 1A:
•
Auto (based on the EDID of the sink) (default)
•
DVI RGB 444
•
HDMI RGB 444 Full
•
HDMI RGB 444 Ltd
•
HDMI YUV 444 Ltd
•
HDMI YUV 422 Ltd
•
TP 1B Mode — This item lets you select the twisted pair mode of the DTP2/XTP/HDBT
Output 1B. To switch among modes for the TP output port, select this item and press
the
•
HDCP Notification — This item lets you select what is displayed on the HDMI output
when the input signal contains HDCP-protected content and the output is a non-HDCP
sink. Press
Green w/OSD — Displays a green screen with the message
•
HDMI output display (default).
Black Screen — Displays a black screen and the output sync is maintained.
•
User Image — Displays a user-uploaded image. To upload images, use the PCS
•
software
Audio Submenu
Figure 24.
The
Audio
use this submenu, press
between the two selections.
TP 1B Format
or
buttons to select the format. The format choices are the same as for
or
buttons to select
DTP
to select this item, then press the
Enter
screen (see the IN1806 and IN1808 Series Help File for instructions).
Logo
Audio Submenu
submenu allows you to mute the audio and to set the audio input format. To
to select this item, then press the
Enter
IN1806 and IN1808 Series Scaling Presentation Switchers • Operation
from the list of
Output
,
, or
.
XTP
HDBT
or
submenu items, then
button to select between:
on the
HDCP Content
or
button to move
38
Advertisement
Table of Contents
