Table of Contents
Advertisement
X2@
=
Test patterns
X2^
=
Input presets
X2*
=
Output sync or OSD menu
timeout
X2(
=
Front Panel Lockout (executive)
mode status
X3)
=
Auto-input switch mode
X3!
=
Auto-input switching priority
X3@
=
Auto-input switch timeout
IN1806 and IN1808 Series Scaling Presentation Switchers • SIS Configuration and Control
0 = Off (default)
1 = Crop
2 = Alternating pixels
3 = Crosshatch
4 = Color Bars
5 = Grayscale
6 = Audio test — Crop pattern with orbiting text AUDIO
TEST and outputting pink noise at LPCM-2Ch,
48 kHz, 24-bit.
Response is two digits, padded with a zero.
1 through 128
Response is three digits, padded with zeros.
Number of seconds before output sync or the OSD menu
times out.
1 through 500 seconds, in 1-second increments
0 = Output sync is instantly disabled with no active video
from the selected input (SSAV command only).
60 = Default for the MDUR command.
501 = Output sync never times out (default for SSAV
command).
0 = Off or disabled (front panel controls fully accessible)
(default).
1 = Mode 1 — Complete front panel lockout
2 = Mode 2 — Input switching, logos, and audio
adjustments only
3 = Mode 3 — Input switching and logos only
4 = Mode 4 — Volume adjustments only
0 = Disabled — Manual switching (default)
1 = User-defined priority mode — The scaler selects the
input to which the user assigns priority. If no priority
is assigned, the scaler selects the active input with the
highest number.
2 = Last connected mode — The scaler selects the most
recently applied input, and retains a history of the
order in which active inputs are connected to the unit.
If an active input is removed, the scaler switches to
the most recently prioritized input.
Input number for input switching priority.
1 = Input 1
2 = Input 2
3 = Input 3
4 = Input 4
5 = Input 5
6 = Input 6
7 = Input 7 (IN1808 Series only)
8 = Input 8 (IN1808 Series only)
Number of seconds without video that elapse before
switching to the previous input.
1 through 500 in 1-second increments
3 = default (3 seconds)
0 = Immediately switch to most recent input if the
current input is removed.
57
Advertisement
Table of Contents
