Table of Contents
Advertisement
Internal Web Page
The IN1806 and IN1808 Series scalers feature an internal web server, displayed as a web
page. This page allows you to monitor and adjust certain settings of the IN1806 and IN1808
Series via a LAN or WAN connection. Use a web browser to view the pages on a PC
connected to the scaler LAN port.
NOTE: The scaler internal web page does not support compatibility mode in Microsoft
This section gives an overview of the internal web page, which is always available and
cannot be erased or overwritten. Topics in this section include:
•
•
Accessing the Web Page
1.
2.
3.
4.
5.
Internet Explorer
(see
Disabling Compatibility Mode
®
recommends using Mozilla
®
Accessing the Web Page
Web Page Components
Connect the scaler to a LAN or WAN using the rear panel RJ-45 LAN connector (see
figures
3
and 4,
, or figures
K
within the IPCP module], on pages 12 and 13).
Open a web browser on a connected PC.
Enter the IP address of the device in the browser
NOTE: The default IP address is 192.168.254.254.
Press the <
> key on the keyboard. The scaler checks if it is password-protected.
Enter
If the device is not password-protected, the web page opens. Skip steps 5 through
•
7.
If the device is password-protected, the
•
Proceed to step 5.
In the
field, enter
Username
Figure 46.
Example of a Network Password Dialog Box
IN1806 and IN1808 Series Scaling Presentation Switchers • Internal Web Pages
Firefox
or Google Chrome™.
®
5
and 6,
, [IN1808 IPCP SA and IN1808 IPCP MA 70
Q
Address
window opens (see figure 46).
Sign in
or
(optional).
admin
user
on the next page). Extron
field.
®
102
Advertisement
Table of Contents
