Extron electronics IN1806 Series User Manual page 40

Available picture controls
The submenu adjusts the following picture settings:
Picture Controls
NOTE: When the aspect ratio changes as a result of
entered, the
Image Position
• Auto-Image — Press the
to restore it to the default size and position. Auto-Image updates horizontal and vertical
image position, and horizontal and vertical image size settings.
NOTE: The
Auto-Image
SIS command. However, there are other Auto-Image options available
Execute
through SIS commands (see the
PCS (see the IN1806 and IN1808 Series PCS Help File). The options include to
execute an Auto-Image and fill the output and to execute an Auto-Image and
maintain the input aspect ratio. These commands ignore the current aspect mode
setting, perform Auto-Image on the input, and then select
The following is performed during an Auto-Image when the aspect ratio is set to
•
:
Fill
Horizontal and vertical image positions return to
•
Horizontal and vertical image sizes match the current output resolution.
•
The following is performed during an Auto-Image when the aspect ratio is set to
•
:
Follow
The horizontal and vertical image position and image size are set to maintain
•
the native aspect of the input rate with regard to the current output resolution.
Set the aspect ratio on the
Image Position — Press the
•
vertical ( ) position of the image. Press the
V
selected position. The ranges are:
Horizontal position:
•
Vertical position:
•
Press to select the changes and return to the submenu.
Enter
Image Size — Press the
•
vertical ( ) size of the image. Press the
V
selected position.
Horizontal size (width):
•
Vertical size (height):
•
Press to select the changes and return to the submenu.
Enter
• IN : Brightness — Press the
n
signal. The range is through
0
Press or „ to select the changes and return to the submenu.
Enter
• IN : Contrast — Press the
n
of the video signal. The range is
ƒ
Press or to select the changes and return to the submenu.
Enter
>
• Detail — Press the and
through . The default is
127
ƒ
Press or to select the changes and return to the submenu.
Enter
IN1806 and IN1808 Series Scaling Presentation Switchers • Operation
and values are updated accordingly.
Image Size
button to execute an Auto-Image on the active input,
Enter
submenu item is the same as the standard Auto-Image
Auto-Image SIS commands
submenu (see
Advanced
ƒ „
and buttons to select the horizontal (
>
and <
through pixels. The default is
-4096 +4096
through lines. The default is
-2160 +2160
ƒ and „ buttons to select the horizontal (
>
and < buttons to adjust the value of the
through of signal
10 8192
through of signal
10 4320
>
and < buttons to adjust the black level of the video
. The default is
127 64
>
and < buttons to adjust the range of white to black levels
through . The default is
0 127
<
buttons to adjust the image sharpness. The range is
).
64
or commands being
Fill Follow
on page 63 or
or .
Fill Follow
.
0000
INn: Aspect Ratio on page 41).
) or
H
buttons to adjust the value of the
.
0000
.
0000
) or
H
.
.
64
0
32