Extron electronics IN1806 Series User Manual page 71

Command
Input Configuration (continued)
Input EDID
Specify an EDID value
View assigned EDID
Save the output EDID to a
custom slot
NOTE: For the Save command,
View EDID native resolution
Example:
Export EDID file
Import EDID file
NOTES:
• For the Import EDID command,
• <Filename> can optionally be a full path name. The EDID file format is 128 or 256 bytes of binary data with a .bin
extension.
• Exporting a default EDID (
Auto-Image
Execute
Execute and fill
Execute and follow
KEY:
X!
= Input selection
X@
= Output
X2!
= EDID emulation
IN1806 and IN1808 Series Scaling Presentation Switchers • SIS Configuration and Control
ASCII Command Response
(Host to Scaler) (Scaler to Host)
E X! X2! }
A * EDID Edid A
E X! } X2!]
A EDID
E X@ X2! }
S * EDID EdidS
X2!
can be 201 through 210 only.
E X2! }
N EDID nnnnxnnnn•@nn.nnHz
Verbose modes 2 and 3:
EdidN
EdidN013*1280x768 @59.87Hz
E X2! }
E ,<filename>EDID
EdidE
E X2! }
I ,<filename>EDID
EdidI
X2!
can be 10 through 210. For the Export command,
X2!
value of 10 through 76) results in HDMI with LPCM-2Ch audio EDID being exported.
1*0A
Img1*0
1*1A
Img1*1
1*2A
Img1*2
1 = DisplayPort input 1
2-6 = HDMI or DVI input 2, 3, 4, 5, or 6
7-8 = DTP2/XTP input 7 or 8 (IN1808 Series only)
9 = Aux audio input
1 = HDMI/DVI output 1A
2 = DTP2/XTP/HDBT output 1B
3 = HDMI/DVI Loop output
See the
Additional Description
X! X2!]
* Assign EDID
View EDID
X@ X2!]
* Save the EDID of output
] Show the resolution and refresh rate of
X2!
EDID
X2!
* nnnnxnnnn•@nn.nnHz
]
X2!]
Export EDID
Import EDID
X2!]
] Execute an Auto-Image for the current
input (follows the current aspect ratio).
] Execute an Auto-Image and fill the
output raster.
]
Execute an Auto-Image and maintain
the aspect ratio of the current input.
Input EDID and Output Resolutions table
X2! X!
to input .
X2! X!
for input .
X@ X2!
to .
.
]
X2!
to <filename>.
X2!
from <filename>.
X2!
can be 201 through 210.
on page 56.
63