Audio Submenu - Extron electronics IN1804 Series User Manual

• Logo Position — This item lets you specify a position for the selected logo on the
display relative to the upper-left corner of the logo. The default is H: 0000 V: 0000.
To position the logo:
Press the Enter button to select Logo Position from the Output submenu. The
1.
Logo Position item appears as a single field on the OSD.
2. Press the
or
3. Press the Enter button to confirm your selections.
4. Press

Audio Submenu

Figure 26.
The Audio submenu allows you to configure the audio settings. To use this submenu, press
Enter to select this item, then press the
• Audio Mute —Select this item to mute and unmute the output audio. You can make
the following audio mute selections:
Off — Audio output is not muted (default).
•
Analog — Mutes the analog audio output only.
•
Digital — Mutes the embedded digital audio output only.
•
On — Mutes both the analog and the embedded digital audio outputs.
•

or buttons to select the horizontal position of the logo, and the

button to select the vertical position.

to return to the Output submenu.

Audio Submenu

or button to step through the selections.

IN1804 Seamless Scaling Switchers • Operation
u
35