Output Submenu - Extron electronics IN1806 Series User Manual

Output Submenu

Figure 23.
The
Output
and TP format, TP mode, HDCP notification, and Loop Out format and connected input.
• Output Rate — Select this item to specify the output resolution and refresh rate. The
IN1806 and IN1808 Series scalers have a range of resolutions from which to choose
(see the
available settings). The available rates depend on the selected resolution.
Ten custom user-defined output rate slots are also available to be defined via SIS
commands or via the
When a resolution is applied to a user-defined EDID slot, its name is displayed in the
Output Resolution
be
C1: 1280x780 @ 60 Hz (EXN)
name of the manufacturer of the device).
NOTE: The 10 custom, user-defined output rates default to 1080p @ 60 Hz when
no custom EDID is captured or uploaded.
Output Submenu
submenu enables you to configure the output resolution, refresh rate, HDMI
Output Resolutions and Refresh Rates
Capture EDID
panel in the format c
(the last three letters in parentheses represent the
IN1806 and IN1808 Series Scaling Presentation Switchers • Operation
table on the next page for the
item on the menu.
Input
: x @ (
n nnnn nnnn nn XXX
). An example would
36