Table of Contents
Advertisement
Internal Web Page
The DTP2 CrossPoint 82 switchers feature an internal web server, displayed as a web page. This page allows
you to monitor and adjust certain settings of the DTP2 CrossPoint 82 via a LAN or WAN connection. Use a web
browser to view the pages on a PC connected to the switcher LAN port.
This section gives an overview of the internal web page, which is always available and cannot be erased or
overwritten. Topics in this section include:
•
Accessing the Web Page
•
Web Page Components
Accessing the Web Page
1. Connect the switcher to a LAN or WAN using the rear panel RJ-45 LAN connector (see
on page 14, or
2. Open a web browser on a connected PC.
3. Enter the IP address of the device in the browser Address field.
NOTE: The default IP address is 192.168.254.254.
4. Press the <Enter> key on the keyboard. The Sign in window opens (see figure 47).
5. In the Username field (see figure 47,
Figure 47. Example of a Network Password Dialog Box
6. Enter the password if one is assigned.
NOTE: The factory configured passwords for all accounts on this device have been set to the device serial
number. Passwords are case sensitive. In the event of an absolute system reset, these passwords are
reset to no password.
To change the password, see
7. Click the Sign In button (
figure
8,
, on page 19).
5
1
Setting a password
).
2
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Internal Web Pages
), enter admin or user (optional).
on page 94.
figures 4 and
5,
,
Q
90
Advertisement
Table of Contents
