Advantech ADAM-5000/TCP Series Manual page 92

Planning Your Application Program
ADAM5KTCP_SetStreamAlarmState
Description:
Syntax:
Parameters: wStreamAlarmState[in]: When assigned to
ADAM5KTCP_Receive StreamIngoreAlarm:
ADAM5KTCP.DLL always signals
Stream WhenAlarm:
Return:
ADAM-5000/TCP User's Manual
Set the criterion to signal the event object
int ADAM5KTCP_SetStreamAlarmState(WORD
wStreamAlarmState);
event object when any stream data comes from
an ADAM-5000/TCP. Then the application can
receive the
"ADAM5KTCP_ReadStreamData()" function.
When assigned to ADAM5KTCP_Receive
means ADAM5KTCP.DLL only signals event
object when a alarm status is triggered. Then
the application can receive the alarm informa-
tion about
calling
"ADAM5KTCP_ReadAlarmInfo()" function.
Please refer to Chapter 6-2-4 "Return Codes" for more
detail information
Chapter 6
means the
stream data by calling
the ADAM-5000/TCP by
6-25