Advantech ADAM-5000/TCP Series Manual page 261

Planning Your Application Program
ADAM-5081 Counter/Frequency Command Set
Command Syntax
$aaT
$aaF
$aaSiArrff
$aaSiB
#aaSi
#aaSiCj
$aaSiØ(data)
$aaSiØ
$aaSiCj5s
6-148 ADAM-5000/TCP User's Manual
Command Name
Read Module Name
Read Firmware
Version
Set Configuration
Read Configuration
Read All Channel
Counter (Frequency)
Data
Read One Channel
Counter (Frequency)
Data
Set Digital filter Scale
Read Digital filter
scale
Set Counter
Start/Stop
Description
Returns the module
name from a specified
ADAM-5000 system.
Returns the firmware
version code from a
specified ADAM-5000
system
Set slot index and
Counter mode
The command requests
the Configuration of slot
Returns the input value of
all channels for the
specified input module
for a specified system in
engineering unit only.
The command will return
the input value from one
of the four channels of a
specified module.
Set the filter seconds to
start to measure the input
signal.
Read the filter seconds
to start to measure the
input signal
Request the addressed
counter/frequency
module to start or
stop the counting.