Analog Input Command Set - Advantech ADAM-5000/TCP Series Manual

Chapter 6
Planning Your Application Program
6-4-3

Analog Input Command Set

commands, the user needs to know the type of main unit being used. If
ADAM-5000/485 is being used, the "i" in Si can be set at
0 to 3. If ADAM-5000E or ADAM-5000/TCP is being used, the "i" in Si
can be set at 0 to 7.
ADAM-5013 RTD Input Command Set
Command Syntax
$aaSiArrff
$aaSiB
$aaSi
$aaSiCj
6-48 ADAM-5000/TCP User's Manual
Command Name
RTD Configuration
RTD Configuration
Status
All RTD Data In
Specified RTD Data
In
Before setting
Description
Sets slot index, input
range, data format
and integration time
for a specified RTD
input module in a
specified system
Returns the
configuration
parameters for a
specified RTD input
module in a specified
system
Returns the input
values of all channels
of a specified RTD
input module of a
specified system in
engineering units
Returns the input value
of a specified channel
for a specified RTD
input module of a
specified system in
engineering units