Table 6-4: Adam-5013 Rtd Input Command Set Table - Advantech ADAM-5000/TCP Series Manual

Planning Your Application Program
Command Syntax
$aaSiER
$aaSi5mm
$aaSi6
$aaSi0
$aaSi1
$aaSi2

Table 6-4: ADAM-5013 RTD Input command Set Table

ADAM-5000/TCP User's Manual
Command Name
Initialize EEPROM
Data
Enable/Disable
Channels for
Multiplexing
Read Channels Status
RTD Span Calibration Calibrates a specified
RTD Zero Calibration
RTD Self Calibration
Chapter 6
Description
Initializes all EEPROM
data in a specified
RTD input module to
their default values
Enables/disables
multiplexing
simultaneously for
separate channels of
the specified input
module
Asks a specified input
module to return the
status of all channels
RTD input module to
correct for gain errors
Calibrates a specified
RTD input module to
correct for offset
errors
Causes a specified
RTD input module of
a specified system to
do a self calibration.
6-49