Advantech ADAM-5000/TCP Series Manual page 179

Planning Your Application Program
$aaSiCjAh
Name
Description
Syntax
Response
ADAM-5000/TCP User's Manual
Read Alarm Mode
Returns the alarm mode for the specified channel in
the specified ADAM-5000/TCP system.
$aaSiCjAh(cr)
$ is a delimiter character.
aa (range 00-FF) represents the 2-character hexadeci-
mal Modbus network address of an ADAM-5000/
TCP system.
SiCj identifies the desired slot i (i : 0 to 7) and the
desired channel j (j : 0 to 7). Ah is the Read Alarm
Mode command.
h indicates alarm type and can have the value H =
High alarm, L = Low alarm
(cr) represents terminating character, carriage return
(0Dh)
!aas(cr) if the command was valid There is no
response if the system detects a syntax error or
communication error or if the specified ad- dress
does not exist.
! delimiter character indicating a valid command was
received.
aa represents the 2-character hexadecimal address
of the corresponding ADAM-5000/TCP system.
s indicates alarm mode and can have the value M =
Momentary mode, L = Latching mode
(cr) represents terminating character, carriage return
(0Dh)
Chapter 6
6-111