Figure C-11: System Shielding - Advantech ADAM-5000/TCP Series Manual

2-2 System Shielding
*
Never stripping too long of the plastic cable cover.
* Cascade those shields together by Soldering
Connect the shield to Frame-Ground of DC Power Supply.
• Never stripping too much of the plastic cable cover. This is
improper and can destroy the characteristics of the Shielded-Twisted-
Pair cablC. Besides, the bare wire shield easily conducts the noisC.
• Cascade these shields together by soldering. Please refer to
following page for further detailed explanation.
• Connect the shield to Frame Ground of DC power supply to force
(The 'frame ground' of the DC power supply should be connected to
the system ground)
ADAM-5000/TCP User's Manual
RS-232

Figure C-11: System Shielding

the conducted noise to flow to the frame ground of the DC power
Grounding Reference
ADA M ADA M ADA M
4520 4013 4017
Appendix C
ADA M
4021
Termi nal Block
Power
.
Supply
+24V
supply.
C-13