Advantech ADAM-5000/TCP Series Manual page 147

Chapter 6
Planning Your Application Program
Command
Syntax
#aaSi
#aaSiCj
$aaSiER
$aaSi0
$aaSi1
Table 6-6: ADAM-5017H /5017UH Analog Input command Set
Table
Note: The command sets " $aasi5mm, $aasi6, $aasi0, $aasi1"
for ADAM-5017H/5017UH are the same with ADAM-5017.
Please refer the preceding pages to learn the detail.
6-80 ADAM-5000/TCP User's Manual
Command
Name
All Analog Data In
Specified Analog
Data In
Initialize EEPROM
Data
Span Calibration
Zero Calibration
Description
Returns the input value of all
channels for a specified
analog input module of a
specified system in currently
configured data format
Returns the input value of a
specified channel of a
specified analog input module
of a specified system in
currently configured data
format
Initializes all EEPROM data in
a specified analog input
module to their default values.
Calibrates a specified analog
input module to correct for
gain errors
Calibrates a specified analog
input module to correct for
offset errors