Advantech ADAM-5000/TCP Series Manual page 207

Chapter 6
Planning Your Application Program
Example
Note: In order to perform a Trim Calibration, either a mA meter or a
output prior to calibration.
6-138 ADAM-5000/TCP User's Manual
(cr) is the terminating character, carriage return (0Dh)
command: $01S1C2314(cr)
response: !01(cr) The command tells channel 2 of
the analog output module in slot 1 of the ADAM-
5000/TCP system at address 01h to increase its
output value by 20 (14h) counts which is
approximately 30 µA. The analog output module
confirms the increase.
resistor and voltmeter should be connected to the
module's