GE AF-650 GP Programming Manual page 97

Parameter Descriptions
DN-31 Store Data Values
Option:
3 3
[0] Off
*
[1] Store edit
setup
[2] Store all
setups
DN-32 Devicenet Revision
Range:
0 [0 - 65535] View the DeviceNet revision number. This
*
DN-33 Store Always
Option: Function:
[0] Off Deactivates non-volatile storage of data.
*
[1] On Stores parameter data received via DeviceNet in
EEPROM non-volatile memory as default.
DN-39 Devicenet F Parameters
Array [1000]
No keypad access
Range:
0 [0 - 0] This parameter is used to configure the frequency
*
converter via DeviceNet and build the EDS-file.
96
Function:
Parameter values changed via DeviceNet are
not automatically stored in non-volatile
memory. Use this parameter to activate a
function that stores parameter values in the
EEPROM non-volatile memory, so changed
parameter values will be retained at power-
down.
Deactivates the non-volatile storage function.
Stores all parameter values from the active set-
up in the non-volatile memory. The selection
returns to [0] Off when all values have been
stored.
Stores all parameter values for all set-ups in the
non-volatile memory. The selection returns to
[0] Off when all parameter values have been
stored.
Function:
parameter is used for EDS file creation.
Function:
AF-650 GP Programming Guide
DET-618C