GE AF-650 GP Programming Manual page 117

Parameter Descriptions
3.18.5 DR-6# Inputs/Outputs
Parameters to view the digital and analog I/O status
values.
DR-60 Digital Input
3 3
Range: Function:
0 [0 - View the signal states from the active digital inputs.
*
1023] Example: Input 18 corresponds to bit no. 5, '0' = no
signal, '1' = connected signal.
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10-63
Table 3.30 Active Digital Inputs
Illustration 3.41 Relay Settings
DR-61 Terminal 53 Switch Setting
Option:
[0] Current
*
[1] Voltage
[2] Pt 1000 [°C]
[3] Pt 1000 [°F]
[4] Ni 1000 [°C]
[5] Ni 1000 [°F]
DR-62 Analog Input 53
Range:
0 [-20 - 20]
*
116
AF-650 GP Programming Guide
Digital input term. 33
Digital input term. 32
Digital input term. 29
Digital input term. 27
Digital input term. 19
Digital input term. 18
Digital input term. 37
Digital input GP I/O term. X30/4
(OPCGPIO)
Digital input GP I/O term. X30/3
(OPCGPIO)
Digital input GP I/O term. X30/2
(OPCGPIO)
Reserved for future terminals
Function:
View the setting of input terminal 53.
Function:
View the actual value at input 53.
DR-63 Terminal 54 Switch Setting
Option: Function:
View the setting of input terminal 54.
[0] Current
*
[1] Voltage
[2] Pt 1000 [°C]
[3] Pt 1000 [°F]
[4] Ni 1000 [°C]
[5] Ni 1000 [°F]
DR-64 Analog Input 54
Range: Function:
0 [-20 - 20] View the actual value at input 54.
*
DR-65 Analog Output 42 [mA]
Range: Function:
0 [0 - 30] View the actual value at output 42 in mA. The
*
value shown reflects the selection in
AN-50 Terminal 42 Output.
DR-66 Digital Output [bin]
Range: Function:
0 [0 - 15] View the binary value of all digital outputs.
*
DR-67 Freq. Input #29 [Hz]
Range: Function:
0 [0 - 130000] View the actual frequency rate on terminal 29.
*
DR-68 Freq. Input #33 [Hz]
Range: Function:
0 [0 - 130000] View the actual value of the frequency applied
*
at terminal 33 as an impulse input.
DR-69 Pulse Output #27 [Hz]
Range: Function:
0 [0 - 40000] View the actual value of pulses applied to
*
terminal 27 in digital output mode.
DR-70 Pulse Output #29 [Hz]
Range: Function:
0 [0 - 40000] View the actual value of pulses at terminal 29 in
*
digital output mode.
DR-71 Relay Output [bin]
Range: Function:
0 [0 - 511] View the settings of all relays.
*
Illustration 3.43 Relay Settings
DET-618C