Microscan MS-615 User Manual page 99

by serial command 3-7
Host Protocol Parameters
by menu selection 2-5, 2-6–2-9
by serial command 3-5–3-7
Host Relay Driver Pulse 4-3
I
See Interleaved 2 of 5
I 2 of 5.
I/O Connector A-2
Installation 1-13
Intercharacter Delay
by menu selection 2-5, 2-9
by serial command 3-7
Intercharacter Gap A-19
Interface A-2
Interface Standards A-14
Interleaved 2 of 5
by menu selection 2-20, 2-23
by serial command 3-11
definition A-13
operational command 4-4
L
Label
angled picket fence orientation A-7
density 1-11
dimensions 1-11
height 1-5
how to position 1-9
length 1-5
ratio 1-11
speed 1-5, 1-11
Label contrast A-3
Label Dimensions 1-11
Label Ratio 1-11
Ladder
number of scans calculation 1-4
Ladder Orientation A-6
Large Intercharacter Gap
of codabar (menu) 2-20, 2-22
of codabar (serial) 3-10
of code 39 (menu) 2-20, 2-21
MS-650 Scanner User's Manual
of code 39 (serial) 3-10
Laser (enable/disable commands) 4-3
Laser On/Off
by menu selection 2-26, 2-27
by serial command 3-12
Light Source A-2
Longitudinal Redundancy Check
by menu selection 2-5, 2-8
by serial command 3-7
See Longitudinal Redundancy
LRC.
Check
M
Master Label Operational Commands
4-5–4-6
Match 2-28
Match Code
by menu selection 2-11, 2-17–2-18
by serial command 3-9
definition A-20
operational command (enter and exit) 4-5
Match Counter Commands 4-4
Match Counter Reset 4-4
Mechanical Specifications A-2
Menu Configuration Program
code types menu 2-19–2-25
communications menu 2-5–2-10
entering 2-2, 4-3
exiting 2-4
loss of communications/when to default
2-4
main menu 2-2
operations menu 2-11–2-18
saving menu changes 2-4
user outputs menu 2-26–2-29
Mirror Type A-2
Mismatch 2-28
Mismatch Counter Commands 4-4
Mismatch or Noread 2-28
Modulus 43 2-19
Mounting Holes 1-13
Mounting Plate Kit A-11
I-3