Operational Tips - Microscan MS-615 User Manual

Table of Contents

Operational Tips

Do:

• Check inputs (label speed, length, height, etc.) to ensure the desired

number of scans per label.

• Avoid excessive tilt, pitch, and skew of the bar code label.

• Check the label for readability by doing a read rate test. If there is any

question about the label's readability, contact your Microscan representa-

tive.

• After changing any parameter that might affect read rate, repeat read rate

test.

• Clean the scanner window with a clean, dry Q-tip or cotton cloth on a reg-

ular basis.

Do Not:

• Aim the scanner into direct light or sunlight.

• Aim the scanner into an external object detector or other light-emitting

device.

• Obstruct the scanner window with mounting hardware or other objects.

• Connect chassis of scanner and host to different ground potentials (see

Ground and Shield Considerations" on page 1-16).

• Operate the scanner in excessive temperature environments (see "Envi-

ronment" on page A-2).

MS-610 Scanner User's Manual

1-15

Table of Contents