Microscan MS-615 User Manual page 55

Chapter
3
Summary of Serial Configuration Commands...................................... 3-2
Serial Configuration Command Format ............................................... 3-3
Concatenating Serial Commands ........................................................ 3-4
Loss of Communications...................................................................... 3-4
Trigger Filter Timing Value................................................................... 3-4
Communications Commands............................................................... 3-5
Protocol................................................................................................ 3-5
Operations Commands ........................................................................ 3-8
Code Types Commands .................................................................... 3-10
User Outputs Commands .................................................................. 3-12
Most of the configuration changes to the scanner that can be made in the
menu can also be accomplished by command strings from the host.
Serial command strings are entered from an ASCII terminal. As with menu
configuration commands, serial configuration commands relate to the initial
scanner setup.
To quickly reference the serial configuration commands, see table 3-1 on
page 3-2.
MS-610 Scanner User's Manual
Serial
Configuration
Chapter Contents
3-1