Installing Floor Plates And Leveling The Processor - Kodak X-Omat 270 RA Installation Instructions Manual

Installing Floor Plates and Leveling the Processor

The weight of the PROCESSOR is 125 kg (275 lb).
[1] Move the PROCESSOR against the wall.
[2] Install the FLOOR PLATES under the
LEVELING SCREWS.
[3] Check that the LIGHT-LOCK GASKET is tight
against the PLYWOOD and the
PROCESSOR.
12
PROCESSOR
Figure 10 Moving the Processor against the Wall
Figure 11 Installing the Floor Plates
wall
H108_0030ACB
H108_0030AA
LEVELING
SCREW (4)
FLOOR PLATE (4)
H104_0131BCD
H104_0131BA
2B6843