Table of Contents
Advertisement
SYSTEM OF ADDITIONAL TREATMENT OF EXHAUST GASES
DPF filter regeneration
By flashing the DPF orange light and turning on the orange warning light (A), the DPF signals the need to
start the DPF filter regeneration.
The operator must start the DPF filter regeneration in the instrument panel menu.
Regeneration is carried out on a standing tractor with an idling engine that is braked by the handbrake (B),
the reversing lever is moved to the neutral position (C) and the PTO clutch is off (D).
By pressing the button (B) enter the menu
1 - Use the (C) and (D) buttons to select ENGINE SETUP and press the (B) button to confirm.
2 - select the item REGEN. FORCED press the button (B) to confirm
3 - if the tractor is stationary with the engine idling, press the button (B) to confirm
4 - If the tractor is braked by the handbrake and the PTOs are switched off, confirm the button (B)
5 - Notice that the ECU now controls the engine operation, not operator
6 - DPF regeneration start
7 - Preheating of the engine
82
C18N033
C18N034
C18N035
Advertisement
Table of Contents
