Windscreen Wiper; Front Wiper Speed Switch; Rear Window Wiper; Windscreen Washer - Zetor CRYSTAL HD 150 Operator's Manual

Table of Contents

Advertisement

Windscreen wiper

The windscreen wiper switch is located on the right pillar
of the cab.
The two-speed windscreen wiper motor is controlled by
a two-position switch.
0 - front wiper off
1 - slower windscreen wiper operation
2 - faster windscreen wiper operation

Front wiper speed switch

The windscreen intermittent wiper is switched by the
switch located on the right pillar of the cab.
Setting the wiping cycle length:
Turn the intermittent wiper on, after the windscreen is
wiped turn it off, wait the desired interval between the
wipes and turn it on again.
The desired interval between wiping is automatically set.
0 - intermittent wiper off
1 - intermittent wiper on

Rear window wiper

The rear window wiper switch is located on the right pillar
of the cab.
The single-speed wiper of the rear window is controlled by
a single-position switch.
0 - rear window wiper off
1 - rear window wiper on

Windscreen washer

The front window washer control button is located on the
right pillar of the cab.
The windscreen washer is activated by pressing the
button. The washer operates as long as the button is
pressed after the button is released, it returns to the off
position. The maximum running time of the washer pump
is 20 seconds.
The front wiper automatically wipes the windscreen when
washer is used. The time of wiping depends on the length
of the washer operation.
0 - windscreen washer off
1 - windscreen washer on
ACQUAINTANCE WITH THE TRACTOR
FHD18N007
FHD18N008
FHD18N009
FHD18N010
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Crystal hd seriesCrystal hd 170

Table of Contents