Rear Pto Shaft Switch - Dependent Speed - Ordinary Mode Of Operation - Zetor CRYSTAL HD 150 Operator's Manual

Rear PTO shaft switch - dependent speed - ordinary mode of operation

The number and the meaning of the speed is dependent on the gear and the position of the reversing lever.
The reduction lever position does not affect the number of revolutions of the rear PTO shaft in dependent
mode - normal mode.
With the tractor stopped while the engine is running:
A - The operator must sit on the driver's seat.
B - PTO shaft speed selector lever selects the dependent speed of the PTO shaft.
C - Dependent PTO shaft speeds are indicated on the dashboard display by not displaying the selected PTO
shaft speed.
The PTO shaft switch button is not functioning in this mode.
D - Select the appropriate speed using the rear PTO shaft speed selector.
E - Depress the clutch pedal and shift the gears with the main shift lever and the travel direction with the
reversing lever.
F - Release the clutch pedal, the rear PTO shaft starts rotating as the tractor is starting, this is signaled by
the number of revolutions of the rear PTO shaft.
When starting the tractor the operator must sit on the driver's seat.
The PTO clutch automatic off switch is not functioning in this mode.
Use the clutch pedal for short-term interruption of torque transmission from the rear PTO
shaft. The switch of the rear PTO shaft is not functional in this mode.
For long term discontinuing the torque transmitted by the rear PTO shaft, move the PTO gear
lever to the neutral position after depressing the clutch pedal and stopping the tractor.
If the operator in this mode of operation of the rear PTO shaft leaves the driver's seat while the
tractor is stationary, the engine switches off .
If the operator in this mode of work of the rear PTO shaft leaves the driver's seat, the engine is
shut down.
DRIVE OF AGRICULTURAL MACHINERY
FHD18N051
141