Warning Signalization Of Hydrostatic Steering Failure; Important Warnings; Limiting Travel Speed - Zetor CRYSTAL HD 150 Operator's Manual

Table of Contents

Advertisement

Warning signalization of hydrostatic steering failure

Hydrostatic steering pump failure is with oil pressure drop
under 120 kPa behind a pump signalized on a dashboard
by an applicable symbol.
Note: When starting the tractor or with low engine
revolutions, the control may blink, if it switches off after
starting or increasing the revolutions, it is not a failure.

Important warnings

In case that indicator of lubrication, battery recharge or
a fault of the hydrostatic steering is on during normal
operation of the tractor, stop the tractor immediately, stop
the engine and contact a specialised repair shop. This
prevents a serious damage or breakdown of the tractor.

Limiting travel speed

With the threat of exceeding the travel speed of
40 km/h, the maximum engine revolutions are
automatically reduced. This function cannot be
switched off.
122
DRIVING OPERATION
P18N069
C18N088
FHD14N068

Advertisement

Table of Contents
loading

This manual is also suitable for:

Crystal hd seriesCrystal hd 170

Table of Contents