Windshield Washer Tank; Washer Nozzle; Fluid Reservoir For Front Axle Brake Control - Zetor CRYSTAL HD 150 Operator's Manual

Table of Contents

Advertisement

Windshield washer tank

Windshield washer tank is placed on the rear wall of the
cabin from the outside side.
The washer tank capacity is 2 litres.
In summer the reservoir should be filled with distilled water
or mixture for washers.
Antifreeze mixture for washers must be used in winter
season for filling the washer tank.

Washer nozzle

The washer nozzle is situated in the upper part of the
hood and is adjustable by needle or steel wire of
maximum diameter 0,8 mm.

Fluid reservoir for front axle brake control

Check the front axle brake fluid tightness and the amount
of fluid in the leveling container.
The front brake control fluid reservoir is located on the
right side of the engine.
Keep the liquid level within 3/4 of the container content
(max. level) to 1/2 of the container content (minimum fluid
level).
The TITAN ZH LHM PLUS hydraulic oil is used as a fluid
in the hydraulic system of the front axle brake control.
TITAN ZH LHM PLUS is not compatible with synthetic hydraulic fluids and therefore must not
be mixed with them.
Under no circumstances TITAN ZH LHM PLUS should be mixed with brake fluids of DOT type!
26
PREVENTIVE DAILY MAINTENANCE
C18N041
C18N042
C18N011

Advertisement

Table of Contents
loading

This manual is also suitable for:

Crystal hd seriesCrystal hd 170

Table of Contents