Machined Area Menu; Processed Area - User Selection - Zetor CRYSTAL HD 150 Operator's Manual

Machined area menu

Enter the service menu by longer pressing of the button (B). Use the buttons (C) and (D) to select the
processed area item indicated with the arrow (a). Press the button (B) to enter the processed area menu (b).
The processed area menu (b):
(1) - user selection - adjustment of the width of the processed area (i.e., the work width of the tools)
(2) - start of the recording of the processed area
(3) - end of the recording of the processed area
(4) - delete the recorded processed area for the selected user
(5) - delete the recorded processed area for all users

Processed area - user selection

Enter the processed area menu - user selection.
Three aggregation widths can be adjusted for each user.
There is an extra memory of the processed area for each user.
In the use selection menu (a) use the buttons (C) and (D) of one out of three users.
Shortly press the button (B) to select the user with the set aggregation.
Long press the button (B) to enter the menu for setting the aggregation for the selected user (b).
(1) - user code and aggregation number
(2) - set width of aggregation
Use the buttons (C) and (D) to select the required aggregation width and shortly press the button (B) for
confirmation. The selected aggregation is marked by the tick (3).
Return to the main screen by repeatedly pressing the button (A).
70
INSTRUMENT PANEL
PHS18N009
PSH18N010