Drive Of Agricultural Machinery; Work With Pto Shaft - Zetor CRYSTAL HD 150 Operator's Manual

Work with PTO shaft

Before attaching of an implement, driven by means of the tractor PTO shaft, check the speed
compatibility of both, it means tractor PTO shaft and implement driven shaft (540 rpm or 1,000 rpm).
Different PTO speed values may cause serious damages and injuries.
Within any repair or modification on the implement powered by PTO or within any operation on
terrain in its working range the tractor engine ought to be switched off (ignition key in position 0).
1. When working with PTO shaft mind that all the covers are duly fixed.
2. After completing the work, always mount the cover of PTO shaft back.
3. Any repairs or cleaning of aggregated machines parts driven by PTO shaft to be done only with the
engine at halt and PTO clutch disengaged.
4. Before starting an aggregated machine driven by PTO shaft, make sure that there are no
unauthorized personnel near, there is a risk of injury.

DRIVE OF AGRICULTURAL MACHINERY

131