Hand Brake; Manual Brake - Signalization - Zetor CRYSTAL HD 150 Operator's Manual

Table of Contents

Advertisement

Hand brake

The handbrake lever is located on the panel to the left of the driver's seat.
To brake the tractor, move the handbrake lever from the front (a) to the rear (b) in which the lever is
automatically locked. The locked handbrake lever is indicated by the light on the dashboard.
To release the tractor, pull the handbrake lever in position (b) slightly up and then move to the position (a).
The indicator light on the instrument panel goes out and the tractor is released.
Caution: If the air pressure in the tractor's air pressure system is less than 10 bar, the rear
wheels of the tractor are braked irrespective of the handbrake lever position.

Manual brake - signalization

If the tractor is not braked by a manual brake, a warning is
displayed on a display (a letter P in a circle) and at the
same time there is a sound signal.
This situation occurs in two cases
a - a tractor unbraked by a manual brake with engine
running and a driver leaves its seat
b - a tractor unbraked by a manual brake standing with
engine off and the key is shifted in '0' position.
Brake the tractor with a manual brake.
116
DRIVING OPERATION
FHD18N031
FHD18N004

Advertisement

Table of Contents
loading

This manual is also suitable for:

Crystal hd seriesCrystal hd 170

Table of Contents