Indication Of Amount Of Urea In The Tank - Zetor CRYSTAL HD 150 Operator's Manual

SYSTEM OF ADDITIONAL TREATMENT OF EXHAUST GASES

Indication of amount of urea in the tank

The amount of urea in the tank is displayed on the instrument panel display on the primary screen.
a - The actual urea state in percent is displayed.
b - A low level of urea in the tank is signaled on the dashboard, the low urea level indicator red (1) or orange
(2). With the low urea warning light, the fault indicator (4) or stop indicator (3) on the instrument panel
illuminates.
c - You will also be prompted to add urea to the tank along with an acoustic signal.
Refill the urea tank whenever refueling.
type of amount of
indication urea in
the tank
1st degree less than
of warning 20%
2nd degree less than
of warning 15%
3rd degree less than
of warning 10%
1st degree less than
of limitation 5%
2nd degree less than
of limitation 3%
86
urea signal lamp display - prompt to
refill urea
signal display
lamp type
orange short-time display
signal (3 s)
lamp
activated
orange short-time display
signal (3 s)
lamp
flashes
(0.5 Hz)
orange Continuous
signal display
lamp (The prompt
flashes disappears after
(0.5 Hz) pressing any
button on the
instrument panel.)
orange Continuous
signal display
lamp (The prompt
flashes disappears after
(1 Hz) pressing any
button on the
instrument panel.)
red signal Continuous
lamp display
flashes
(2 Hz)
P18N030
defect
signal
lamp
acoustic reduction of power
signal and limitation of
engine revolutions
1 x 1 s
1 x 1 s
2 x 3 s
2 x 3 s reduction of power by
25%
2 x 3 s reduction of power by
50%, limitation of
max. engine
revolutions to ca.
1,250 rpm)