Wheel Track Chang; Front Wheels Track Of Front Drive Axle In Tractors Equipped With Non-Removable Discs - Zetor CRYSTAL HD 150 Operator's Manual

Front wheels track of front drive axle in tractors equipped with non-removable discs

Front wheels track
Tyre
dimensions
mm
16,9-24 2090
420/85R24 2010
480/70R24 1980
540/65R24 2014
14,9-28 2090
16,9-28 2090
380/85R28 2090
420/70R28 2014
420/85R28 2014
480/65R28 2014
480/70R28 1914
540/65R28 1914
Secure the tractor against motion first, heave the axle by a heaver and support. Tighten the nut
of front wheels at a torque of 300 - 350 Nm.
The change of wheel tracks is done by turning the wheel and mounting with rim offset to the inside, while the
wheels are interchanged to keep the right direction of the tyre pattern with arrow to the front.
- Demount front wheels.
- Interchange the front wheels and mount with rim offset to the inside.
- Nuts tightening front wheels to be tightened at a torque of 300 - 350 Nm.
- After travelling the distance of 100 m with an unloaded tractor, tighten the nuts tightening the front wheels
again to the prescribed torque.
- After loading the tractor, tighten the nuts tightening the front wheels after 3 Mh.
- After 10 Mh, retest the tightening of nuts fixing the front wheels.

WHEEL TRACK CHANG

mm
1840
1960
-
1890
1840
1840
1840
1890
1890
1890
1890
1890
169