Table of Contents
Advertisement
Clutch couplings overheating signalization
The danger of overheating of the clutch couplings is indicated by several warning levels
A - informative - a risk of overheating of the clutch couplings
B - warning - a risk of overheating of the clutch couplings, adjust the working mode of the tractor so that the
couplings are less loaded
C - warning - overheated clutch couplings, stop the work, stop the tractor, let the engine idle, move the
reversing lever to neutral position and wait until the temperature of the clutch couplings decreases (no
warning will be displayed on the display)
Signalization of a need to replace engine oil outside the service interval
Replace the engine oil and engine oil filter.
If the tractor has a high load or frequent regeneration of the DPF, engine oil degradation has occurred and
motor oil has to be changed prior to the maintenance interval. This is signaled by a warning on the
instrument panel display.
The oil change warning on the instrument panel display can be turned off by pressing the (A) button on the
dashboard and going back to the display of the basic screens.
When the engine oil change warning is turned off, the orange light for a minor fault of the system remains lit.
The next time the key in the ignition switch is moved from 0 to I position, the engine oil change warning is
displayed again.
After replacing the engine oil, the oil change warning is to be deleted using the Deutz (sw
Serdia) diagnostic software.
78
INSTRUMENT PANEL
C18N090
C18N028
Advertisement
Table of Contents
