Diesel Particle Filter - System Failures Signalization; Diesel Particle Filter Failure Codes - Zetor PROXIMA PLUS 90 2012 Operator's Manual

DIESEL PARTICLE FILTER – SYSTEM FAILURES
SIGNALIZATION
Failures in diesel particle system failure are signalized by a red con-
trol lighting up on the dashboard with engine running and subse-
quently by an acoustic signal.
If the failure is not removed, it is signalized with any following start-
ing of the engine
The code of failure us displayed on a display (1) of the displaying
unit which is accessible after removing the right cover of the steer-
ing console.
The failures are displayed on display (1) in a form of E: double-
figured code of failure
For example: E:36, number 36 representing the code of failure
If failure is not signalized, operation data of diesel particle filter sys-
tem are displayed on the display.
The acoustic signal can be turned off by the button (2). If the failure
has not been removed, the acoustic signal is active with repeated
staring of the engine and can be turned off again by the button (2).
DRIVING
FH12N075
If the key is in switchbox in "I" position and the engine is not
started, approximately ten minutes later the diesel particle
filter system starts signalizing a failure. Switch the key to "0"
position and start the engine. The code of failure on the dis-
play E:32 or E:33.

DIESEL PARTICLE FILTER FAILURE CODES

Failure
code E:
11, 12, 21,
22, 23, 31,
34, 35, 37,
38, 41, 42,
51, 52, 61,
62
32, 33,
36
59
Operator´s activity
The tractor can be worked
without any limitations, af-
ter terminating your work,
contact authorized service
and report the code of
failure.
Switch the key to "0" posi-
tion and start the engine.
Regenerate diesel particle
filter