Clutch Pedal Check And Adjustment; Brake Pedal Check And Adjustment; V-Belt Check And Adjustment - Zetor COMPAX CL Series Operator's Manual

Clutch Pedal Check and Adjustment

The clutch pedal play increases with operation. The
correct play of the clutch pedal is 20 - 30 mm.
If the play is excessive, adjust the clutch pedal.
Adjustment:
1. Remove the side cover (left).
2. Loosen the lock nut and turn the tension nut to adjust
the play to the correct value.
3. After adjusting, make sure that the lock nut is tight.
4. Reinstall the side cover.

Brake Pedal Check and Adjustment

The operation changes the brake pedal play, as well as
the alignment between the right and left pedals. The
correct play of the brake pedal is 30 - 40 mm.
In case of excessive play or pedals asymmetry, adjust the
brake pedals.
Adjustment:
1. Unscrew the lock nut and turn the adjusting nut to
adjust the play.
2. Turning counterclockwise increases the play, while
turning it clockwise decreases the play.
3. After adjustment, tighten the lock nut firmly.
Caution:
Uneven adjustment of the left and right pedal will result in one sided braking when the pedals

are connected and can cause serious accidents, especially at high speeds.
Double check to ensure free play is the same on both pedals.


V-belt Check and Adjustment

Regularly check and adjust the fan V-belt tension.
1. Slightly loosen the alternator mounting screw and adjust
the tension by sliding the alternator.
2. Check belt tension. Press the middle of the belt with
a weight of 6 - 7 kg (13.23 ~ 15.43 lbs).
If the belt bends by 7 - 9 mm (0.28 ~ 0.35 in.), its
adjustment is correct.
84
MAINTENANCE
CCL3540053
CCL3540054
CCL3540055