Information Display - Basic View; Information Display - Fault Notifications; Information Display - Warning Indication Of The Hand Brake - Zetor MAJOR CL Operator's Manual

Information display - basic view

The following values are displayed on the main display:
1. Engine revolutions (number of revolutions per minute)
2. Voltage of the tractor electrical network
3. Total number of operating hours

Information display - fault notifications

If a less serious defect of the system occurs, the DTC
defect code is displayed on the display.
Simultaneously the orange engine failure signal lamp is
activated.
If there are more defects, the displayed DTC codes of
individual defects change each two seconds. The DTC
code is displayed until the defect is fixed..
If this situation occurs, stop the tractor and
contact the service centre.
Information display -
The hand brake symbol is displayed on the display of the
instrument panel in case that the tractor must be stopped
by braked the hand brake. Indication of the hand brake
symbol is accompanied by an acoustic signal.
More information in chapter DRIVING.
ACQUAINTANCE WITH THE TRACTOR
33
MCL18N006
MCL18N007
MCL18N009