Display Elements Of The Rf210M Reader; Technical Specifications Of The Rf210M Reader - Siemens SIMATIC Ident System Manual

Readers
5.2 SIMATIC RF210M
5.2.5

Display elements of the RF210M reader

Color
green
yellow
flashing red
Only in the "with presence" mode.
1)
5.2.6

Technical specifications of the RF210M reader

Table 5- 2
Product type designation
Radio frequencies
Operating frequency, rated value
Electrical data
Maximum range
Maximum data transmission rate reader ↔ tran-
sponder (tag)
•
•
Typical transmission time for user data per byte
•
•
Baud rate
Read/write distances of the reader
Interfaces
Electrical connector design
Standard for interfaces for communication
Antenna
98
Meaning
flashing Operating voltage present, reader not initialized or antenna switched off
permanently Operating voltage present, reader initialized and antenna switched on
lit
Transponder present
1)
Error has occurred, the type of flashing corresponds to the error code in the
table in the section "Error codes". The optical error display is only reset if the
corresponding reset parameter ("option_1 = 2") is set (see Product infor-
mation "SIMATIC RF200 command set"
(https://support.industry.siemens.com/cs/ww/en/view/44864850)).
Technical specifications of the RF210M reader
Read
Write
for write access
for read access
SIMATIC RF210M
13.56 MHz
20 mm
ISO tags
approx. 1500 bytes/s
•
approx. 1500 bytes/s
•
0.6 ms
•
0.6 ms
•
19200, 57600, 115200 Bd
see section "Field data (Page 37)"
M8, 8-pin
RS-422
integrated
System Manual, 07/2015, J31069-D0227-U001-A9-7618
6GT2823-0AA00
SIMATIC RF200