Rf240R - Siemens SIMATIC Ident System Manual

RF200 system planning
4.3 Installation guidelines
Transponder
MDS D522
MDS D522
Special variant
MDS D524
MDS D526
MDS D528
Mounting the transponder on or in metal is only possible with the appropriate spacer or if there is
1)
adequate clearance to the metal.
Values of > 100 % related to non metal surroundings can occur if transponders were developed
2)
specifically for mounting in/on metallic surroundings.
4.3.4.3

RF240R

The RF240R can be flush-mounted in metal. Please allow for a possible reduction in the field
data values.
Figure 4-11
56
metal-free
flush-mounted in metal;
distance all round 0 mm
metal-free
flush-mounted in metal;
distance all round 0 mm
metal-free
1)
on metal, distance 0 mm
flush-mounted in metal;
distance all round 0 mm
metal-free
1)
on metal, distance 25 mm
flush-mounted in metal;
distance all round 50 mm
metal-free
on metal, distance 0 mm
metal-free space RF240R
Reader without direct
metal influence
(Case a, b and d)
100
85
100
85
100
96
86
100
90
80
100
100
System Manual, 07/2015, J31069-D0227-U001-A9-7618
Reader flush-
mounted in metal
(Case c)
90
85
90
85
93
89
82
90
75
70
94
94
SIMATIC RF200