Installing The Rf290R Reader; Wall Mounting - Siemens SIMATIC Ident System Manual

5.7.5

Installing the RF290R reader

5.7.5.1

Wall mounting

Use the holes in the housing to screw the device to the wall or onto a horizontal surface. The
position of the drill holes is shown in the following figure:
Figure 5-17
A: M4 threaded socket for potential connection of the reader. You will find further information
on the potential connection in the section "Further information (Page 87)".
SIMATIC RF200
System Manual, 07/2015, J31069-D0227-U001-A9-7618
Drilling pattern for the RF290R (dimensions in mm)
Readers
5.7 SIMATIC RF290R
133